Calcium Ion Selective Electrode (ISE)

Calcium ion selective electrodes are used to measure that parameter in an aqueuous solution. In addition, the electrode combined with our ion meters is an easy, quick method used to check the amount of calcium present in water and related samples.

Above all, our calcium ISE is specifically designed to measure 0.5 ppm to saturated (5×10-6 M to Saturated) concentrations of Ca+2.

Measure calcium in a wide range of aqueous solutions. In conclusion, our half cell ion selective electrode is based on the latest nanotechnology innovative research. All the same, it must work along with a reference electrode.

Their main applications of the calcium sensors are:

SPECIFICATIONS

Range (concentration): 0,4 to 4000 mg/L  / 1×10-6 to 0,1 (mol/L)
Reproducibility (precision): ±20% of full scale (calibrated 10 to 1000 mg/L)
Interfering ions: K+, NH4+, H+, Na+
pH range: 3.4 to 8 (no pH compensation)
Temperature range: 4 – 40°C (no temperature compensation)
Electrode slope: 24 ±5 mV
Electrode resistance: 1–4 MΩ
Immersion minimum: 2 mm
Body diameter: see different sensors

Go to calcium products
1
2
3
Calcium single ion
1

Mini ION Calcium

ISE Calcium

2

Single Probe

3

BNC or USB

ISE Calcium meter + pH

The imacimus kit analysis system allows the direct measurement of the exact concentration of calcium , thus giving rise to rapid analysis and greater reliability.

1
2
3
4
5
kit calcium ion meter
1

Single probe calcium

Calcium single ion

2

Single ION pH

pH single ion

3

calcium meter

pH calcium meter

4

USB cable

USB Cable

5

NT Sensors software

software imacimus

src=”https://www.ntsensors.com/wp-content/uploads/2018/10/pdf-1.png” alt=”” width=”59″ height=”59″ />

Single Ion: Calcium electrode

The most classic look-like ion selective electrode, with innovative replaceable tip and probe holder for several tip sensors. Discover this electrode, one body, multiple sensor tips.

Calcium ion-selective electrode probeREF: S040
Diameter: 12 mm.

Conector type:
– BNC (standard)
– USB (imacimus meter)

PDF information about Single Ion

Buy ISE Calcium + probe

ISE Calcium

Where is calcium measurement required so far?

Calcium sensors are used for measuring calcium in water. The concentration of calcium in water is also known as water hardness. Hard water contributes to scaling in boilers and industrial equipment. Measuring calcium in water is important in industrial settings in order to prevent costly breakdowns that can be caused by limescale.

Water hardness also affects fish because it influences osmoregulation, which is their constant internal regulation of body fluid concentration. High levels of calcium in water can trigger diseases in fish. Calcium sensors can be used in fish farming to ensure the levels are maintained at an optimum place and can also be used for measuring calcium in water that is designed for drinking.

Also, calcium is also one of the most important minerals in the blood. Total blood calcium testing is important to measure the total amount of calcium in the blood.
Calcium is also essential for the nerves, heart and muscles to function properly.

Need more info? Contact us here!

...