Lithium ion selective electrode (ISE)

Measure ISE Lithium ion in aqueous based solutions.

NT Sensors, manufacturer of electrochemical sensors since 2008 has developed its own lithium ion selective electrode.

With good selectiviy towards other cations, Lithium ISE can be used in different applications where lithium levels require to be determined.

Good response time <60 sec. Nernstian Sensitivity. Dry-storage. Small sample volumes required.

...

SPECIFICATIONS

Range (concentration): 0,09 to 9000 mg/L  / 5×10-6 to 0,5 (mol/L)
Reproducibility (precision): ±10% of full scale (calibrated 10 to 1000 mg/L)
Interfering ions: K+, Na+, H+
pH range: 2 to 12 (no pH compensation)
Temperature range: 4 – 40°C (no temperature compensation)
Electrode slope: 54 ±5 mV
Electrode resistance: 1–4 MΩ
Immersion minimum: 2 mm (without the protective cap)
Body diameter: see different sensors

1
2
3
Lithium single ion
1

Mini ION Lithium

ISE Lithium

2

Single Probe

3

BNC or USB

Nano 2.5: Miniature electrode for Lithium

Nano probes that are ideal for research applications or ultra-low volume purposes. Capable to work in al positions (vertical, horizontal, upside down).  In addition, the carbon nanotubes provides the real miniaturization. Moreover, retaining good performance in terms of ease of use and robustness of operation.

Lithium nano electrode

REF: M007
Diameter: 2,5 mm
Minimum sample volume: 0,25 ml

More information about
Nano 2.5
View product

Single Ion: Lithium electrode

The most classic look-like ion selective electrode, with innovative replaceable tip and probe holder for several tip sensors. Discover this electrode, one body, multiple sensor tips.

Lithium ion-selective electrode probeREF: S007
Diameter: 12 mm

Conector type:
– BNC (standard)
– USB (imacimus meter)

Minimum sample volume: 5 ml
PDF information about Single Ion