The information obtained allows the proper fertilizer’s dosage to obtain an optimum performance
Precision and accuracy to manage yield evolution. IMACIMUS is based on advanced electrochemical technique
The imacimus Multi ION equipment allows a rational use of resources and reduces the environmental impact
The potentiometry technique (ISE) is economical and easy to operate and in situ, in addition, ion selective electrodes have a wide concentration measurement range.
In agriculture allows the determination of pH, CE (electrical conductivity) and nutrient-soluble ions such as nitrates, chlorides, ammonium, magnesium, potassium, calcium and sodium are of key importance to increase crop yields and reduce fertilizer costs
IMACIMUS Multi ION , a line up of portable meters that allow for quick and reliable ion measurement. Simultaneously Measure and display 10 Parameters (7 ions/nutrients/ pH /conductivity/ water hardness) in Real Time.
NT Sensors imacimus 10 equipment is recommended for direct or diluted samples aqueous analysis.
However, nutrients cannot be analyzed directly from the soil. Soil analysis requires the extraction of soluble nutrients from the soil, which can then be determined by multiparameter ISEs imacimus Kit.
imacimus Multi Ion equipment has been validated by NT Sensors using the analysis results from four different laboratories. The comparative study concluded that not significant differences were observed when analyzing the same sample using imacimus equipment.
Combine ONE parameter with pH measurement simultanously.
pH and ION at one shot.
Up to 4 ION and pH simultaneously in 60 seconds.
Measuring range 1 to >10.000 mg/L
Customize, ask for electrode tips, configure your own IMACIMUS 5
Minimum sample volume 10 ml. Units: mmol/L or mg/L – ppm
Complete Multi ION probe. Calcium, Chloride, Potassium, Sodium, Ammonium, Nitrate, Magnesium
Measuring range 1 to >10.000 mg/L
Resolution 0,01 pH / from 0 to 1.0ppm : 0.1ppm from 0 to 9999ppm : 1ppm
Minimum sample volume 10ml / Units: mmol/L or mg/L -ppm
