IC2-KIT (pH + Iodide)
The Ion Analyser for Iodide and pH is supplied with powerful analysis software that displays the measurement (and allows identification) and allows customised calibration up to 5 customised standard points, among other features. Continuous monitoring is also available for short-term process or reaction studies. The iodide ion sensor is a spare module and can be exchanged for a new iodide sensor or any other sensor tip available in our catalogue. Please note the limited lifetime of the ISE sensor, even if it is stored on a shelf or installed in a probe. Different sensors differ by several months under the same conditions.
SKU: PRO1073-I
GTIN: 8436610061995
Example of typical ISE applications:
Ca2+=Calcium | Cl-=Chloride | K+=K+=Potassium | Na+=Sodium | NO3-=Nitrate | Mg2+=Magnesium | NH4+=Amonium
| Field*/ Ion |
Ca2+ |
Cl- |
K+ |
Na+ |
NO3- |
Mg2+ |
NH4+ |
pH |
| Agriculture |
X |
X |
X |
X |
X |
X |
X |
X |
| Aquarium |
X |
X |
|
X |
X |
X |
X |
X |
| Food |
X |
|
|
X |
X |
|
|
X |
| Drink |
X |
|
|
X |
X |
|
|
X |
| Water |
X |
X |
X |
X |
X |
X |
X |
X |
| Wastewater |
X |
X |
X |
X |
X |
X |
X |
X |
| Seawater |
X |
X |
X |
X |
|
|
X |
|
| Health science |
X |
|
X |
X |
|
|
X |
|
- Dual Channel ION/mV/pH for use with PC/Laptop.
- Software for Windows
- USB cable for data/power
- Single ION PROBE.
- Mini Iodide Electrode
- Reference electrode/pH
- Calibration Standard 10 mg/L Iodide (100 mL)
- Calibration Standard 100 mg/L Iodide (100 mL)
- Calibration Standard 1000 mg/L Iodide (100 mL)
- pH buffers 4/7 (2x50ml)
- Deionized water (50 mL)
- User manual
Your Iodide Ion and pH tool kit comes with all the items you need to start reading samples.
Employing the same operating principle as standard laboratory electrodes.
- The potentiometry technique (ISE) is relatively inexpensive and easy to operate.
- Ion selective electrodes have a wide concentration measurement range.
| Specifications |
Data |
| ISE range |
0.1…10,000 mg/l |
| ISE/pH resolution |
0 to 14 pH is 0.01 pH
0 to 1.0 ppm is 0.1 ppm
1 to 9,000 ppm is 1 ppm
|
| ISE accuracy |
±4% * In the absence of interfering ions, the accuracy can be better than ±1 mV, which corresponds to ±4% of the measurement.
|
| ISE repeatability |
±10% monovalent ** Repeatability in the measurement of a standard solution after calibration
|
| ISE/pH calibration |
2 to 5 points.
Fully customizable calibration standards.
|
| Power Supply |
USB – 5V – 0.5A |
| Temperature range |
4-50 ºC |
| Interface |
Imacimus software application for Windows |
| Connectivity |
Mini USB female AB type connector |
| Method |
Electrochemical / ISE |
