imacimus 10 Multi ION & pH meter (ION selective electrodes included) IMACIMUS Multi ION is a unique instrument to analyze the concentration of up to 10 parameters pH, Cl, NO3-, NH4+, Ca2+, Mg2+, K+, Na+, hardness and conductivity in only 60 seconds.
Example of some applications:
Wastewater
Well water
Water hardness
Seawater
Drinking water
Cloudy feed water
Groundwater
Water hardness
Desalination plants
Irrigation solutions
Fertilizers
Sap analysis
Aquaponic systems
Irrigation water
Hydroponic systems
Soil extract
Vegetable fabrics
Nutritional status
Environmental sciences
Nutritional solutions
Processed foods
Aquaculture
Nitrate contamination
Beer, wine, sugar, milk, …
Fish farming
Urine
Water applications
This COMPLETE KIT contains everything you need to analyze your samples:ISE electrodes, probes, reference electrode, potentiometer, standard calibration solutions, pH buffers and measuring boxes.
NT Sensors has developed solid-state ion-selective electrodes for on-site chemical analysis prior to full laboratory analysis. Solid state nanotechnology allows the miniaturisation of ISE, i.e. the determination of up to 10 parameters with only 2 probes, in the same volume of liquid as one parameter would be analysed.
The IMACIMUS Multi Ion instrument from NT Sensors analyses up to 10 parameters (pH, Cl, NO3-, NH4+, Ca2+, Mg2+, K+, Na+, hardness and conductivity) in one measurement in only 60 seconds.
Thanks to NT Sensors’ multi-ion solutions, all 10 parameters are calibrated at the same time with only three calibration points.
Sonda múltiple
Single ION pH
Cable USB
NT Sensors software
Example of typical applications of ESI:
Chemical condition sensors such as pH, EC (electrical conductivity) and nutrient soluble ions such as nitrates, chlorides, ammonium, magnesium, potassium, calcium and sodium are the new tools of precision agriculture. However, nutrients cannot be analysed directly from the soil, requiring a separation of the sample and the soil. This requires the use of a vacuum probe that extracts soluble nutrients from the soil and then be determined by multi-parametric readers such as the IMACIMUS kit.
For validation, NT Sensors carried out a comparative report with results obtained in four different laboratories that analysed the same sample using the IMACIMUS kit. They concluded that, although there are variations in the analyses between the laboratories and the equipment evaluated, the differences are not significant.
The NT Sensors imacimus 10 kit includes: Miniature ISE: Ca+2, Cl-, K+, Na+, NH4+, NO3- and Mg2+:
1x ISE Ammonium Electrode
1x ISE Chloride Electrode
1x ISE Magnesium Electrode
1x ISE Nitrate Electrode
1x ISE Sodium Elektrode
1x ISE Potassium Electrode
1x ISE Calcium Elektrode
More:
1x Multi-ion probe for up to 7 ISE, without electrodes, USB connector
1x Tweezers for replacing mini electrodes
1x USB cable
1x pH/Ref 1 m cable, BNC
1x IC10 multi ion meter
1x pH Buffers
1x Conditioning solution for Multi ION 1X125 ml.
1x Carrying case
1x Calibration standards Multi ION medium range(3×125 ml)
1x Calibration / Measuring box with 6 x 25 ml flask
imacimus 10 using the same operating principle as standard laboratory electrodes
The potentiometry technique (ISE) is relatively inexpensive and easy to operate.
Ion selective electrodes have a wide concentration measurement range.
The life expectancy of Ammonium ISE is 9 months, even if stored on a shelf or installed in a probe.
Specifications
Data
ISE range
0.09 to 9,000 ppm, which is a linear ISE range 5e-6 to 0.5 mol/L
ISE/pH resolution
0 to 14 pH is 0.01 pH
0 to 1.0 ppm is 0.1 ppm
1 to 9000 ppm is 1 ppm
ISE accuracy
±4% * In the absence of interfering ions, the accuracy can be better than 1 mV, which corresponds to 4% of the measurement.
Repeatability ISE
±10% monovalent ** Repeatability in the measurement of a standard solution after calibration.
ISE/pH calibration
From 2 to 5 points. Fully customizable calibration standards.
