logo
logo
1000mg Standard solution chloride
100mg Standard solution chloride
10mg Standard solution chloride
Buffer solution pH 7.00
Buffer solution pH 4.01
imacimus software

ISE Chloride + pH Meter

Dual Chloride ISE + pH Meter This laboratory precision chloride ION meter is a nanotechnology instrument used to obtain reliable data using data combining a chloride selective electrode and a pH electrode. Multiparameter instrument for Cl- ion concentration and pH analysis ( imacimus 2: pH & ISE) The chloride tester is used to measure chloride ions and pH simultaneously in aqueous solutions.
This kit includes the potentiometer, chloride ion selective electrode, pH, reference electrode and calibration standards.
Examples where to apply the chloride control:

  • Water applications
  • Wastewater
  • Groundwater
  • Irrigation solutions
  • Milk
  • Cloudy feed water
  • Soil
  • Beer and wine analysis
  • Sugar

995,00 € (NO tax)

Product description

IC2-KIT (pH + tester cloruro)

The chloride ion and pH analyser is supplied with powerful analysis software that displays the measurement (and allows you to identify it) and can customise its calibration up to 5 customised standard points, among other features. Continuous monitoring is also available for the study of short-term reactions or processes.

The chloride ion sensor is a replacement module and can be exchanged for a new chloride sensor or any other sensor available in our catalogue.

Take note of the limited lifetime of the ISE chloride sensor, even if stored on a shelf or installed in a probe. Different sensors differ by several months under the same conditions.

Chloride determination is of particular importance in water desalination, waste water treatment, food industries and agricultural applications.
The determination of chloride according to NF ISO 9297:2000 based on the Mohr method. It uses a colorimetric determination of the equivalent point (with silver chromate) by titration with silver nitrate (AgNO3) as titrant. However, the colorimetric determination gives results of low reproducibility and low sensitivity. To overcome the problems of sensitivity and reproducibility, it is recommended to use a potentiometric determination of the chloride equivalent point with the same titrant and chloride ISE.

 

Una sonda única de cloruro

Cloruro single ion

Single ION pH

pH de un solo ion

Medidor de Cloruro

Medidor de Cloruro y pH

Cable USB

Cable USB

NT Sensors software

software imacimus

Ejemplo de aplicaciones típicas de los ISE:

Ca2+=Calcio | Cl-=Cloruro | K+=Potasio | Na+=Sodio | NO3-=Nitrato | Mg2+=Magnesio | NH4+=Amonio
Campo*/ Ion Ca2+ Cl- K+ Na+ NO3- Mg2+ NH4+ pH
Agricultura X X X X X X X X
Acuario X X X X X X X
Comida X X X X
Bebida X X X X
Agua X X X X X X X X
Aguas residuales X X X X X X X X
Agua de mar X X X X X
Ciencias de la salud X X X X

– 1x Chloride meter with dual channel mV/ pH/ indicator for PC/laptop use.
Ref.
Imacimus 2 Meter – 1x Software for Windows (free download) – 1x USB data/power cable – 1x SINGLE IONIC PROBE.
Support for up to 1 Mini ISE.
– 1x Mini chloride electrode – 1x Reference electrode/pH – 1x Calibration Standard 10 mg/L Chloride 100mL – 1x Calibration Standard 100 mg/L Chloride 100mL – 1x Calibration Standard 1000 mg/L Chloride 100mL – 1x Buffers pH4 (50 ml) – 1x Buffers pH7 (50 ml) – 1x User’s Manual

Your pH and chloride ion tool kit comes with all the elements you need to start reading samples.

Employing the same operating principle as standard laboratory electrodes

  • The potentiometry technique (ISE) is relatively inexpensive and easy to operate.
  • Ion selective electrodes have a wide concentration measurement range.
Specifications Data
ISE range 0.4 to 4,000 mg/L
ISE/pH resolution 0.4 to 4,000 mg/L
0 to 14 pH is 0.01 pH
0 to 1.0 ppm is 0.1 ppm
1 to 9,999 ppm is 1 ppm
ISE accuracy ±4 % or 8 % * In the absence of interfering ions, the accuracy may be better than ±1 mV, i.e., corresponding to ±4 % of the measurement.
(For divalent ions, ±2 mV; ± 8 %)
Repeatability ISE ±10% monovalent ±10% divalent ** Repeatability in the measurement of a standard solution after calibration
ISE/pH calibration From 2 to 5 points.
Fully customizable calibration standards.
Power Supply USB – 5V – 0.5A
Temperature range 4-50 ºC
Interface Imacimus Windows software application ws
Connectivity Mini USB female connector type AB
Method Electrochemical / ISE

imacimus 2 guide

Guidance software

Single ION guide

Click here to visit the warranty page

Additional information

Weight 1 kg

Related Products

Related products

Carrer de la Font, 48
43480 Vila-seca.
(Spain)

Phone: +34 977 65 39 25

Company

Legal

Support