The continuously ION Robot LAB

EXCLUSIVE WORLD – AUTOMATIC ION METER AMIC7

UP TO 7 IONS SIMULTANEOUSLY + CONTINUOUSLY

Ca2+ | Cl- | K+ | Na+ | NH4+ | NO3- | Mg

Automatic IONs meter with continuous measurement with which to obtain up to 10 parameters at the same time.
WITHOUT HUMAN INTERVENTION

The automatic ion meter AMIC equipment is ready for continuous and simultaneous analysis of processed water, waste water, hydroponic systems, algae reactors, and any other place where automatic information about ionic sample composition is needed.

You can configure the sample intake according to the sampling point (atmospheric pressure or positive pressure). It also has got auto-diagnosis functions to inform users when something is not exactly right.

Direct measurement: There’s no sample pre-treatment necessary and it’s not interfered by sample colour or turbidity.

Easy setup and handling: Obtain readings through a multi ion probe configured with specific modular ion selective electrodes. This method provides a wide measurement range (see specifications table for each ion) and avoids cross interferences using combinations of electrodes.

Built in an IP66: The equipment is  box that can be placed either indoors or outdoors.

AMIC periodically checks that the calculated concentration values are correct, the condition of the tubes and that it does not run out of any liquid (calibration solutions, water and sample).

AMIC7 continuous measurement with which to obtain up to 10 parameters at the same time.

7-IONs IN A CONTINUOUS METER
WITH LABORATORY PRECISION

  • With the same benefits as imacimus 10
  • +
  • Continuous measurements
  • Easy in the installation
  • Easy to maintain
  • LAB Without human intervention
  • For all kinds of industries
  • IP66 protection
  • Data collection
  • Control panel ON / OFF ( Online / Offline)
  • and much more…

Pre-Launch!
Just on waitlists and limited units.

AMIC7 Automatic ION meter
0Weeks0Days0Hours0Minutes0Seconds